Model Number: 400
Material: PMMA (plexiglass)
Type: Hand Tools
Number of Pieces: 1 sets
400 cavity manual capsule filling machine, capsule filler Without tamping tool, can be customized for 00# 0# 1# 2# 3# 4# size
– 400 holes semi-automatic capsule filling machine set with 400 holes enable you to assemble 400 pieces pill capsules once greatly save your time
– Made from PMMA(Plexiglass) material, chemical resistance, long lifetime and save to use
– Based on the capsule structure and pill filling theory, fast filling and assemble speed, evenly filling level, high assemble success rate up to 99%
– Comes with powder block plate no worry about the power fall out, keep your desktop clean
– The detailed English manual includes in the package, no worry to use
1. This tool is made from PMMA(Plexiglass), please do not put under the sun or dry it up by hot air gun.when you washed it, just put it in the cool well-ventilated place
2. When you store it, please put it vertically.
– 1* 400 Holes Manual Capsule Filling Machine Set
Cavity: 400Holes, 16X25 Holes
LAB, small factory, sample room, university and home.
1. Body plate
2. Director plate
3. Cap plate
4. Middle plate
1,Take the cap sheet. Place it on a clean, dry surface.
2,Place the encapsulation sheet on top of the cap sheet using the black pegs to fix it correctly in place
3,Pour capsule tops into the encapsulation sheet and, using a circular motion, gently shake the tops into the holes. While doing this, cover the gap in the wall of the encapsulation sheet with one hand to avoid spilling the tops.
4,When the holes are filled pour out the excess tops.
5,Remove the encapsulation sheet and put the filled cap sheet to one side.
6,Now take the bottom sheet. Fix the encapsulation sheet to the bottom sheet, using the black pegs to fix it correctly in place.
7,Pour bottoms into the encapsulation sheet and shake as before to fill the holes. Pour off excess bottoms
8,Remove the filled encapsulation sheet and put it carefully to one side.
9,Pour a scoop of powder filler onto the bottom sheet and use the spreader to fill the bottoms.
10,Take the filled cap sheet and place the middle sheet on top using the black pegs to fit it correctly in place.
11,Turn the cap sheet / middle sheet over and fix to the bottom sheet. Using both hands and equal pressure, press down once to fit both parts of the capsule together.
There are 00# 0# 1# 2# 3# 4# size for choose.
00# capsule filling machine only use for 00# capsule , 1# capsule filling machine only use for 1# capsule etc…