1. The adoption of high quality plastic material, which is more durable for long-term use.
2. The product is wrapped in circular arc shapes, which has a beautiful appearance and provides comfortable operation.
3. With a precise and unique design, this capsule filler is easy to use and effective in reducing loss.
4. Imitates the automatic mechanical arrangement, you can organize the capsule lid and capsule body quickly, more convenient to use and improve the filling efficiency of the capsules.
5. Effective to deal with the problem of filling capsules, such as small batch processing, production, capsules made by themselves.
6. Size: 29cm in length and 19.2cm in width (measurement size has error, for reference only)
7. Weight: With pressed powder board Net weight: 2.9kg After packaging, the weight is 3.5kg (the measured size has an error, just for reference)
Capsule board composition:
1. Guide plate: there is a frame around it, there is a notch (for easy pouring of the extra capsule), there are 2 positioning screws on the diagonal
2. Cap plate: double-layer plexiglass with relatively small spacing between the plates (capsule caps are installed)
3. Intermediate board: single-layer plexiglass, with gaps on both sides (for marking, non-defective)
4. Body board: double-layer plexiglass, with a relatively large board surface spacing, with springs and copper feet (with capsule body)
5. Powder scraper: a single white plastic sheet (the powder is scraped into the capsule on the body plate, not the powder in the guide plate)
6. Pressed powder board (cannot be used alone, optional accessories): If the powder density is small, it is very light. It is recommended to use a pressed powder board. The function is to compact the powder inside the capsule, then flatten it with a spatula, fill the powder again, and then flatten it.
Instructions for use text:
1. Guide the capsule cap to the cap plate:
Place the guide plate on the cap plate, pour the capsule cap on the guide plate, shake, and guide the capsule cap onto the cap plate
(Tip, individual capsule caps are inverted, you can take 1 capsule cap with your hand, use the open end of the capsule cap to pull out the inverted capsule cap
2. Guide the capsule body to the body plate: put the guide plate on the body plate, pour the capsule body on the guide plate, shake, and introduce the capsule cap onto the body plate
3. Put the powder into the capsule body, pour the powder powder on the body plate filled with the capsule body, scrape the powder powder on the body plate with a powder scraper, make the powder powder fall into the hole of the capsule body and fill the powder again Powder (there is a pressed powder board, if there is no pressed powder board, this step can be omitted)
4. To fit the capsules, place the notched side of the middle plate on the cap plate with the capsule cap, turn the middle plate and the cap plate 180 degrees, and put them on the body plate, the cap plate, the middle plate, and the body plate. Align the edges, press lightly a few times to make the capsule cap and the capsule body initially fit, and then press to the end.