How To Make Capsules With Capsule Filling Machine

Bestshoptheday is a manufacturer and distributor of capsule filling machines, our website sells capsule filling machines in various sizes and most complete models, we have 800 hole/600 hole/400 hole/200 hole/187 hole/100 hole capsule filling machines, most of them have complete capsule models including #000 #00 #0 #1 #2 #3 #4. We help individuals and small businesses start their businesses or make many capsules in very little time.

Today, let’s learn how you can start making capsules after receiving our capsule filling machines.

We will start by going over the various plates that make up a capsule filling machine so that you know what you have in your hands and what you should do next in the process of making capsules.

The Capsule Filling Machine Consists Of The Following Panels

Body Plate

Arrangement Plate (frame Plate)

Powder Press Plate

Middle Plate

Cap Plate

How To Make Capsules With Capsule Filling Machine

1. Put the arrangement plate (frame plate) on the body plate, pour the capsule body on it, shake it from side to side, and let the capsule body enter the hole of the body plate.

2. Take off the arrangement plate (frame plate), pour the powder on the body plate, scrape the powder into the hole of the body plate with the bracket plate, and you can use the pressed powder plate to snap on the body plate to press the powder in the hole of the body plate tightly and solidly, then repeat filling the powder until the hole of the body plate is filled.

3. Put the arrangement plate (frame plate) on the cap plate, pour the capsule cap on the arrangement plate (frame plate), and shake it from side to side to let the capsule cap into the hole of the cap plate.

4. Take off the arrangement plate (frame plate), snap the middle plate on the cap plate, make sure the middle plate is on the bottom and the cap plate is on the top, and then snap these 2 plates on the body plate.

5. so the final order is the cap plate at the top, the middle is the middle plate, and the bottom is the body plate.

6. Then use both hands to press down the cap plate so that the capsule cap on the cap plate is combined with the capsule body on the body plate, and the complete capsule is successfully made.

Summary

In this tutorial, we got to know the various boards that make up a capsule filling machine and explained how to use the machine to complete a capsule.

P.S. This tutorial applies to most Plexiglas capsule filling machines, such as the 800-holes/600-holes/400-holes capsule filling machines.

You can also see the whole process of making capsules in the video below.

If you have questions, you are welcome to contact us through the “Contact Us” page or chat with us online via WhatsApp at +8613512509865.